How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that is full of appeal for drivers. It has good visibility and a strong performance engine. It also has an excellent safety rating.
It is nevertheless important to ensure that you have at minimum two keys that are working for your vehicle. If you lose the only key, it can be costly to purchase an additional one.
How to Replace the Ignition Key in the Saab9-3
You have to replace your car key if it won't turn. This guide will explain how to replace the ignition key on the Saab 9-3. You'll need a replacement key and a new battery that can be reprogrammed, and a new key-fob cover.
Contrary to earlier models, modern Saab cars use transponders in the key-fob rather than a physical key made of metal to unlock and start the car. The problem with this is that the reprogrammable batteries in the key-fob will eventually wear out and won't hold a charge anymore. This is particularly when you use the same key for the same lock.
A professional locksmith can replace the battery fairly easily. You can also do it yourself if have the appropriate tools and a bit of patience. The first step involves separating the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. It is essential to work slowly, since the plastic is very thin and can easily be damaged.
Once the case is opened then you can prepare the new key by combining the lower part of the old key and the transponder and banana on the new key. This will ensure that the new key is properly connected to your CIM that can be a major difference when replacing the sole key on your Saab 9-3.
How to Replace the Ignition Key in a Saab 900
If you don't have two keys you'll have to remove the steering wheel and dashboard to get to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off the dashboard and trim pieces that surround the steering wheel. Once the dash has been taken off, you can push an screwdriver through the hole at the back of the ignition switch and pull it out.
The ignition cylinder houses a key lock that can prevent the car from starting if a key isn't in it. If the ignition switch on your 900 isn't working properly, check to see whether the key is inside the lock or snared inside the barrel. It's also a good idea to rotate your keys frequently and keep them clean to ensure that they don't get bent.
Saab cars differ from other cars due to the fact that they don't have traditional keys made of metal. Instead, the car can recognize the electronic signals generated by the key fob through a chip that is specifically designed for it.
If you lose just one working key fob your dealer will charge you the cost of replacing your computer module (also known as the CIM). We can however reprogram your existing computer's EEPROM to prepare it to accept new keys without replacing it. You'll save up to 50% off the dealer's cost! This is the SAAB KEY PROGRAM. Find out more here!
How to replace the ignition Key on a Saab 9-5
The metal component of a traditional Saab key is simple to copy, and not much of a barrier against vehicle theft. The real security comes from the electronic part that's in the key fob, which has a chip inside which recognizes your car once it's put into the ignition switch.
Saab has relied on the technology of this anti-theft system for over a decade. It's not as good as an actual lock on the door however it makes the process of stealing your vehicle more difficult. This is the reason why every Saab owner should always have a spare key on hand.
The majority of new Saabs come with two keys, but they can be added at the dealer's expense using a handheld device referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 models, which are more modern and newer features that require keys-fobs.
If you lose all keys, the dealer will replace your CIM or TWICE modules, and charge you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.
How do I replace the ignition Key in the Saab XC90
If your SAAB 9-3 key fob begins having problems turning the barrel of the lock It could be the time to replace it. The process is fairly simple and you don't even need to go to a dealership. You can complete the process at home, using a couple of basic tools.
First, you'll need to prepare the keys for your new car. Before you start, ensure that the anti-theft device is disabled by placing blocks on the rear wheels and releasing the handbrake. Next, put the key in the ignition and switch it to the on position which activates the accessories, but doesn't start the engine. Repeat this procedure five times, and then leave the key in the on position.
You'll need to purchase an additional case for your key fob. They can be found at any auto parts shop, and they're typically quite affordable. Based on replacement key for saab 93 , you could even buy them without electronic components.
To open the case simply push the flathead screwdriver into the slot in the middle. When you've split the case, you'll have access to all of the internal electronics. Use a flathead screwdriver to gently remove the electronic components.